Skip to main content
  1. Home
  2. Products
  3. DAQ & Automation
Products & Services

DAQ & Automation

We connect analyzers, instruments and field devices to data acquisition, automation and remote monitoring using standard industrial protocols, and we build our own DAQ software, AeroDAQ.

AeroDAQ softwareModbus RTU/TCPEthernet / TCP-IPDigital & analog I/OEdge gateways

What this covers

Scope can cover communications, protocol integration, historian functions, dashboards, alarms, remote access and connected IoT devices.

Data Acquisition Software

DAQ software and historian workflows for live and historical engineering data.

  • Live data acquisition and storage
  • Trend, tabular and analysis views
  • Alarms, diagnostics and reporting
See product groups

Industrial Communications

Device and protocol integration across common industrial communication methods.

  • Modbus RTU/TCP and serial interfaces
  • Ethernet, TCP/IP and gateway integration
  • Signal mapping and protocol conversion
See product groups

IoT Devices

Connected field and edge devices for telemetry, remote monitoring and controlled data exchange.

  • Edge gateways and remote telemetry
  • Secure device-to-server connectivity
  • Sensor and field-device integration

Automation Integration

Automation interfaces linking measurement, control and supervisory systems.

  • Digital and analog I/O
  • Relay and control interfaces
  • Supervisory integration and event handling

AeroDAQ by AESST

Our own DAQ software package for monitoring stations, a central server, the cloud and mobile.

  • AESST DAS station software
  • AESST Central DAS server
  • AESST Cloud portal and mobile app
AESST software

AeroDAQ: our own data acquisition software

AeroDAQ is developed by AESST for air-quality and emission monitoring. One package covers the station PC, a central server, a web portal and a mobile app, so data from the analyzer reaches everyone who needs it.

Station data acquisition hardware connected to AeroDAQ
Station hardware running AESST DAS
Readings flow to Central, Cloud and mobileAuto check requests travel back to the station
Station software

AESST DAS

Runs on the PC at each monitoring station. Polls the analyzers and sensors, stores every reading and shows live values, trends and alarms on site.

Central server

AESST Central DAS

Collects data from many stations into one database, so a plant or network is managed from one dashboard with charts, analysis and reports.

Web portal

AESST Cloud

Each industry gets its own login and sees only its own stations. Data reaches the cloud from the stations or from the Central server.

Android and iOS

AESST Mobile

The same view as the Cloud portal, on a phone. Station data, trends and alarms wherever you are.

  • Built for CPCB requirements

    Designed around CPCB guidelines and data formats for monitoring stations in India.

  • Many parameters per station

    Built to handle around 50 parameters at once, from gas analyzers to weather sensors.

  • One database

    Stations, Central and Cloud read from one data model, so numbers match everywhere.

  • Remote auto check

    Start an analyzer auto check from the Cloud portal or the mobile app, sent to the station directly or through the Central server.

  • View-only remote access

    Cloud and mobile users can see everything on the Central dashboard but cannot change station or parameter settings.

  • Licensed per installation

    AESST is the developer and licensor. Each installation runs under an AESST licence.

Where this fits in a monitoring system

Most projects touch several stages. We plan the interfaces between them so readings arrive intact.

  1. SenseSensors and analyzers
  2. SampleProbes, lines, conditioning
  3. AnalyseAnalyzers, calibration
  4. AcquireLoggers, DAQ software
  5. TransmitProtocols, networks
  6. ReportDashboards, records

Stages covered on this page

Maintenance after handover

Preventive maintenance, calibration support, repairs and spares for anything on this page, under an AMC, CMC or O&M contract.

Compare contracts

Common questions

For anything specific to your site, send an enquiry.

Which protocols do you integrate?

Modbus RTU and TCP, serial interfaces, Ethernet and TCP/IP gateways, plus digital and analog I/O for instruments without a data port.

Can you connect existing analyzers to a new logger?

Usually, yes. We map the signals and protocols of the installed equipment and convert where needed.

What should an enquiry include?

The application, equipment manufacturer and model, parameters, quantities, site location and any specification or BOQ you have.

Need a DAQ, automation or IoT integration?

Send the RFQ, specification, installed-equipment list or service scope. An engineer reads it and replies with the scope and next steps.

Start an enquiry service@aesst.com · +91-9830483527